Panic Bar Installation & Exit Device Repair in Metro Atlanta
A push bar that sticks, fails to retract the latch or does not secure after the door closes needs attention. Downs Locksmith & Security provides commercial panic bar installation and exit device repair and replacement in Metro Atlanta.
Service is scheduled during standard business hours.
- Serving Atlanta Since 1900
- BBB A+ Rated
- Alpharetta Storefront & Showroom
We assess the device together with the door, strike and closing hardware. That helps distinguish an internal hardware problem from an alignment issue and ensures the proposed work accounts for how the opening needs to function.

Problems That Call for an Exit Hardware Assessment
- The push pad moves, but the latch does not retract fully.
- The door requires extra pressure or repeated attempts to open.
- The device is loose, damaged or pulling away from the door.
- The door closes but does not latch securely.
- The outside handle no longer works as intended.
- Paired doors interfere with one another during closing.
Tell us whether the problem affects opening from inside, access from outside or latching after use. Those are different functions and may involve different components.
If a required exit is not operating, notify the responsible building manager promptly and follow the property's safety procedures. Do not add improvised locks or fasteners to hold an exit closed.

Panic Bar Installation for Commercial Doors
Choosing an exit device begins with the opening's use and requirements. The device must be compatible with the door construction, frame, dimensions and intended exit arrangement.
New installation may involve door preparation, a compatible strike, exterior trim and closing hardware. On a pair of doors, the way both leaves operate needs to be considered. A narrow-stile aluminum entrance can require a different solution from a steel personnel door.
If you are replacing the entire entrance, plan the exit hardware with the commercial door installation rather than selecting it after the door is ordered.
Exit Device Repair or Replacement
Repair may be appropriate when the device is serviceable and the fault can be corrected with compatible parts or adjustments. Replacement may be needed for damage, unavailable components or a device that no longer suits the opening.
Before replacing the push bar, check whether the door is dragging or the latch is loading against a misaligned strike. A new device can develop the same symptom if that condition remains.
For doors with sagging or frame issues, see commercial door repair. If the door cannot complete its closing cycle, door closer service may also be relevant.
Device Types and Compatibility
Exit devices can secure a door at different points. A rim device typically latches at the edge against a strike. Vertical-rod systems use a different arrangement, often at the top and bottom of the opening. Mortise exit devices use a lock case within the door.
Those differences affect replacement parts, door preparation and adjustment. The correct choice depends on the opening, rather than appearance alone. Provide photos of the push side, door edge and frame, plus any readable manufacturer or model information.
Panic Hardware and Fire Exit Hardware Are Not Interchangeable
Where an opening is fire-rated, the required hardware must be suitable for that rated assembly. Ordinary panic hardware should not be substituted solely because it fits the door.
Identification labels, the door's listing and the applicable requirements guide the choice. Refer to our fire-rated commercial door service when the project involves a rated opening or a documented inspection issue.
Coordinate Exit Hardware with Electronic Access
Some properties need controlled entry from outside while preserving the required exit function from inside. Electrified trim or other compatible hardware may form part of that design, but the operation needs to be defined for the specific door.
Tell us about card readers, alarms, automatic operators or other connected equipment. Our commercial door security retrofit service focuses on physical door hardware coordination; broader credential management belongs with the access-control system scope.
Panic Bar and Exit Device Questions
Does every commercial door need a panic bar?
+
No. Requirements depend on factors such as the building's use, occupant load, door location and adopted codes. The correct hardware should be established for the specific opening, not chosen by applying one rule to every business.
Can you replace the push bar and keep the outside handle?
+
It may be possible if the exterior trim is compatible, serviceable and provides the required function. Manufacturer compatibility and existing preparation need to be checked before promising reuse.
Why does the bar work when the door is open but stick when it is closed?
+
That pattern can indicate pressure or misalignment at the latch and strike, although the device itself still needs to be checked. Describe this behavior when requesting service because it helps identify what to assess.
What affects exit device replacement cost?
+
Device type, exterior trim, door preparation, electrical requirements and associated alignment work all affect the scope. Rated openings and paired doors may involve additional compatibility checks.
Schedule Commercial Exit Hardware Service
Downs serves Metro Atlanta from Alpharetta. Send the property address, affected door location, photos and any inspection report or hardware schedule that applies.
View all commercial door services.